Publikationen des Sonderforschungsbereichs 1153

  • Budde, Laura; Biester, Kai; Coors, Timm; Faqiri, Mohamad Yusuf; Lammers, Marius; Hermsdorf, Jörg; Hassel, Thomas; Pape, Florian; Overmeyer, Ludger (2023): Influence of shielding gas coverage during laser hot-wire cladding with high carbon steelThe International Journal of Advanced Manufacturing Technology 127(7-8) | Datei |
    DOI: 10.1007/s00170-023-11350-z
  • Budde, Laura; Biester, Kai; Lammers, Marius; Hermsdorf, Jörg; Kaierle, Stefan; Overmeyer, Ludger (2023): Influence of process parameters on single weld seam geometry and process stability in Laser Hot-Wire Cladding of AISI 52100Advances in Industrial and Manufacturing Engineering 7 | Datei |
    DOI: 10.1016/j.aime.2023.100122
  • Kruse, Jens (2023): Werkzeugintegrierte Prozessgrößenüberwachung beim Querkeilwalzen hybrider Halbzeuge im Rahmen von Tailored-Forming-ProzesskettenTEWISS - Berichteaus dem IPH | Datei |
    ISBN: 3-95900-845-7
  • Merkel, Paulina; Kruse, Jens; Kriwall, Mareile; Behrens, Bernd-Arno; Stonis, Malte (2023): Contact Temperature Measurements on Hybrid Aluminum–Steel Workpieces in a Cross-Wedge Rolling ProcessJournal of Manufacturing and Materials Processing 7(130) | Datei |
    DOI: 10.3390/jmmp7040130
  • Nowroth, Christian; Grajczak, Jan; Schmelt, Andreas; Nothdurft, Sarah; Twiefel, Jens; Hermsdorf, Jörg; Kaierle, Stefan; Wallaschek, Jörg (2023): Feasibility study on multifrequency excitation of the melt pool during ultrasonic-assisted laser beam weldingUltrasonics 131(106954), S. 1-7
    ISBN: https://doi.org/10.1016/j.ultras.2023.106954
  • Pascal, Kern; Lennart, Hinz; Markus, Kästner;Eduard, Reithmeier (2023): Identification and correction of magnification factor deviations of a telecentric fringe projection systemProc. SPIE 12618, Optical Measurement Systems for Industrial Inspection XIII, 126180I (15 August 2023) | Datei |
    DOI: 10.1117/12.2673617
  • Biester, K.; Budde, L.; Barroi, A.; Lammers, M.; Hermsdorf, J.; Overmeyer, L. (2022): Investigation of deposition welding in vertical and horizontal position with a coaxial laser wire welding headThe International Journal of Advanced Manufacturing Technology | Datei |
    DOI: 10.1007/s00170-022-09013-6
  • Budde, L.; Biester, K.; Merkel, P.; Lammers, M.; Kriwall, M.; Hermsdorf, J.; Stonis, M.; Behrens, B.-A.; Overmeyer, L. (2022): Investigation of the material combination 20MnCr5 and X45CrSi9-3 in the tailored forming of shafts with bearing seatsProduction Engineering | Datei |
    DOI: 10.1007/s11740-022-01119-w
  • Budde, L.; Prasanthan, V.; Merkel, P.; Kruse, J.; Faqiri, M. Y.; Lammers, M.; Kriwall, M.; Hermsdorf, J.; Stonis, M.; Hassel, T.; Breidenstein, B.; Behrens, B.-A.; Denkena, B.; Overmeyer, L. (2022): Material dependent surface and subsurface properties of hybrid componentsProd. Eng. Res. Devel. (2022) | Datei |
    DOI: https://doi.org/10.1007/s11740-022-01128-9
  • Budde, Laura; Biester, Kai; Huse, Michael; Lammers, Marius; Hermsdorf, Jörg; Overmeyer, Ludger (2022): Empirical Model for the Description of Weld Seam Geometry in Coaxial Laser Hot Wire Deposition Welding Processes with Different Steel WiresLasers in Manufacturing and Materials Processing | Datei |
    DOI: 10.1007/s40516-022-00170-w
  • Budde, Laura; Biester, Kai; Lammers, Marius; Hermsdorf, Jörg; Kaierle, Stefan; Overmeyer, Ludger (2022): Process stability and weld seam geometry during deposition welding with high-carbon wire material AISI52100International Congress on Applications of Lasers & Electro-Optics, 17.-20.10.2022, Orlando
  • Budde, Laura; Lammers, Marius; Hermsdorf, Jörg; Kaierle, Stefan; Overmeyer, Ludger (2022): Laser Metal Deposition welding with high carbon steel wire material 100Cr6Procedia CIRP 111 (2022), S. 224–227
    DOI: 10.1016/j.procir.2022.08.054
  • Budde, Laura; Merkel, Paulina; Prasanthan, Vannila; Bährisch, Susanne; Faqiri, Mohamad Yusuf; Lammers, Marius; Stonis, Malte; Hermsdorf, Jörg; Hassel, Thomas; Uhe, Johanna; Behrens, Bernd-Arno; Breidenstein, Bernd; Overmeyer, Ludger (2022): Combination of Cladding Processes with subsequent Hot Forming as a New Approach for the Production of Hybrid ComponentsProceedings of the 33rd Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, 25.-27.07.2022, Austin, USA
  • Budde, Laura; Prasanthan, Vannila; Kruse, Jens; Faqiri, Mohamad Yusuf; Lammers, Marius; Hermsdorf, Jörg; Stonis, Malte; Hassel, Thomas; Breidenstein, Bernd; Behrens, Bernd-Arno; Denkena, Berend; Overmeyer, Ludger (2022): Investigation of the influence of the forming process and finishing processes on the properties of the surface and subsurface of hybrid componentsThe International Journal of Advanced Manufacturing Technology 119(1-2)
    DOI: 10.1007/s00170-021-08066-3
  • C. Nowroth, T. Gu, J. Grajczak, S. Nothdurft, J. Twiefel, J. Hermsdorf, S. Kaierle, J. Wallaschek (2022): Deep Learning-Based Weld Contour and Defect Detection from Micrographs of Laser Beam Welded Semi-Finished ProductsApplied Sciences | Datei |
    DOI: https://doi.org/10.3390/app12094645
  • Denkena, Berend; Klemme, Heinrich; Handrup, Miriam (2022): Maschinelles Lernen erhöht Prozesssicherheit in der Zerspanung von Tailored Forming BauteilenZukunft.Digital 01, S. 28-31 | Datei |
  • Fricke, Lara V.; Thürer, Susanne E.; Kahra, Christoph; Bährisch, Susanne; Herbst, Sebastian; Nürnberger, Florian; Behrens, Bernd-Arno; Maier, Hans Jürgen; Klose, Christian; Barton, Sebastian (2022): Non-destructive evaluation of workpiece properties via the hybdrid-bearing bushing process chainJournal of Materials Engineering and Performance
    DOI: https://doi.org/10.1007/s11665-022-07598-3
  • Grajczak, Jan; Nowroth, Christian; Long, Yangyang; Twiefel, Jens; Wallaschek, Jörg; Nothdurft, Sarah; Hermsdorf, Jörg; Kaierle, Stefan (2022): Investigations on the effect of post treatment utilizing ultrasonic standing waves on the hardness of laser beam welds in stainless steelProcedia CIRP 111 (2022), S. 405–408
    DOI: https://doi.org/10.1016/j.procir.2022.08.176
  • Grajczak, Jan; Nowroth, Christian; Saure, Felix; Twiefel, Jens; Wallaschek, Jörg; Coors, Timm; Pape, Florian; Poll, Gerhard; Nothdurft, Sarah; Hermsdorf, Jörg; Wesling, Volker; Kaierle, Stefan (2022): Investigations on the specifics of laser power modulation in laser beam welding of round barsLasers in Manufacturing and Materials Processing 9, S. 469-480
    DOI: https://doi.org/10.1007/s40516-022-00183-5
  • Grajczak, Jan; Nowroth, Christian; Twiefel, Jens; Wallaschek, Jörg; Nothdurft, Sarah; Hermsdorf, Jörg; Kaierle, Stefan (2022): Enhancing dissimilar metal welding using ultrasonic excitationLaser Systems Europe 57(3), S. 34-35 | Datei | Weitere Informationen
  • Grajczak, Jan; Nowroth, Christian; Twiefel, Jens; Wallaschek, Jörg; Nothdurft, Sarah; Hermsdorf, Jörg; Kaierle, Stefan (2022): Investigations on the Effect of Standing Ultrasonic Waves on the Microstructure and Hardness of Laser Beam Welded Butt Joints of Stainless Steel and Nickel Base AlloyJournal of Laser Applications 34(042014), S. 1-9
    DOI: https://doi.org/10.2351/7.0000765
  • Grajczak, Jan; Nowroth, Christian; Twiefel, Jens; Wallaschek, Jörg; Nothdurft, Sarah; Hermsdorf, Jörg; Kaierle, Stefan (2022): Investigations on the effect of post treatment utilizing ultrasonic standing waves on the hardness of laser beam welds in stainless steelProcedia CIRP 111 (2022), S. 405–408
    DOI: https://doi.org/10.1016/j.procir.2022.08.176
  • Grajczak, Jan; Nowroth, Christian; Twiefel, Jens; Wallaschek, Jörg; Nothdurft, Sarah; Hermsdorf, Jörg; Kaierle, Stefan (2022): Investigations on the effect of standing ultrasonic waves on the microstructure and hardness of laser beam welded butt joints of stainless steel and nickel base alloyJournal of Laser Applications 34(4)
    DOI: 10.2351/7.0000765
  • Heimes, Norman; Wester, Hendrik; Golovko, Oleksandr; Klose, Christian; Maier, Hans Jürgen; Uhe, Johanna (2022): Characterisation and Modelling of Intermetallic Phase Growth of Aluminium and Titanium in a Tailored Forming Process ChainIn: Liewald, M., Verl, A., Bauernhansl, T., Möhring, HC. (eds) Production at the Leading Edge of Technology. WGP 2022. Lecture Notes in Production Engineering. Springer, Cham. | Datei |
    DOI: https://doi.org/10.1007/978-3-031-18318-8_4
  • Herrmann, Kevin; Bode, Behrend; Wurst, Johanna; Gembarski, Paul Christoph; Mozgova, Iryna; Lachmayer, Roland (2022): Quantifizierung des materialbezogenen ökologischen Impacts von topologieoptimierten MultimaterialbauteilenDS 119: Proceedings of the 33rd Symposium Design for X (DFX2022), 20.-23.09.2022, Hamburg
    DOI: 10.35199/dfx2022.01
  • Ince, Caner-Veli; Geggier, Jan; Raatz, Annika (2022): Fin Ray gripper for handling of high temperature hybrid forging objectsProcedia CIRP 106 (2022), S. 114–119
    DOI: 10.1016/j.procir.2022.02.164
  • Middendorf, Philipp; Rothgänger, Marcel; Peddinghaus, Julius; Brunotte, Kai; Uhe, Johanna; Behrens, Bernd; Quentin, Lorenz; Kästner, Markus; Reithmeier, Eduard (2022): In Situ Wear Measurement of Hot Forging Dies Using Robot Aided Endoscopic Fringe ProjectionKey Engineering Materials 926, S. 1211-1220
    DOI: 10.4028/p-k81788
  • Nothdurft, Sarah (2022): Beeinflussung des Schmelzbades beim Laserstrahlschweißen durch Ultraschall und daraus resultierende Schweißgut- und GefügeausbildungBerichte aus dem LZH , TEWISS Verlag, Garbsen
    ISBN: 9783959007313
  • Peddinghaus, Julius; Faqiri, Yusuf; Hassel, Thomas; Uhe, Johanna; Behrens, Bernd-Arno (2022): Development of a Temperature-Graded Tailored Forming Process for Hybrid Axial Bearing WashersIn: Liewald, M., Verl, A., Bauernhansl, T., Möhring, HC. (eds) Production at the Leading Edge of Technology. WGP 2022. Lecture Notes in Production Engineering. Springer, Cham. | Datei |
    DOI: https://doi.org/10.1007/978-3-031-18318-8_1
  • Prasanthan, Vannila (2022): Randzone und Lebensdauer mechanisch bearbeiteter hybrider BauteileBerichte aus dem IFW, Band 05/2022 , TEWISS, Garbsen
    ISBN: 978-3-95900-701-6
  • Sheveleva, Tatyana; Wawer, Max Leo; Oladazimi, Pooya; Koepler, Oliver; Nürnberger, Florian; Lachmayer, Roland; Auer, Sören; Mozgova, Iryna (2022): Creation of a Knowledge Space by Semantically Linking Data Repository and Knowledge Management System - a Use Case from Production EngineeringIFAC PapersOnLine 55-10 (2022) 2030–2035
    DOI: doi.org/10.1016/j.ifacol.2022.10.006
  • Thürer, S. E.; Peters, K.; Heidenblut, T.; Heimes, N.; Peddinghaus, J.;Nürnberger, F., Behrens, B.-A.; Maier, H. J.; Klose, C. (2022): Characterization of the Interface between Aluminum and Iron in Co-Extruded Semi-Finished ProductsMaterials (15) 1692
    DOI: https://doi.org/10.3390/ma15051692
  • Thürer, Susanne. E.; Uhe, Johanna; Schäfke, Florian P.; Heimes, Norman; Nürnberger, Florian; Behrens, Bernd-Arno; Klose, Christian (2022): Lateral Angular Co-Extrusion of Aluminum and Steel for the Manufacturing of Coaxial Composite ProfilesProceedings of the Twelfth International Aluminum Extrusion Technology Seminar (ET '22), 3.-5. Mai 2022, Orlando, Florida
  • Witt, Matthias (2022): Kraftsensitiver Werkzeugrevolver zur Prozessüberwachung und automatisierten Adaption der Prozesseinstellgrößen beim DrehenBerichte aus dem IFW BAnd 02/2022, TEWISS, Garbsen
    ISBN: 978-3-95900-675-0
  • Barroi, Alexander; Biester, Kai; Budde, Laura; Lammers, Marius; Hermsdorf, Jörg; Overmeyer, Ludger (2021): Height variation in scanned hot-wire laser surfacing processesProceedings of LiM 2021, Wissenschaftliche Gesellschaft Lasertechnik e.V. | Datei |
  • Behrens, B.-A., Uhe, J., Petersen, T., Demter, P. Büdenbender, C., Ross, I. (2021): Joining zone evaluation of hybrid semi-finished products after backward can extrusion30th Anniversary International Conference on Metallurgy and Materials, Brno, Czech Republic, Mai 2021, S. 317-322 | Datei |
    DOI: https://doi.org/10.37904/metal.2021.4106
  • Behrens, B.-A., Uhe, J., Süer, F., Duran, D., Matthias, T., Ross, I. (2021): Fabrication of steel-aluminium parts by impact extrusionMaterials Today: Proceedings | Datei |
  • Behrens, B.-A.; Wester, H.; Petersen, T.; Uhe, J.; Büdenbender, C.; Peddinghaus, J.; Chugreevaa, A. (2021): Numerical evaluation of forging process designs of a hybrid co-extruded demonstrator consisting of steel and aluminium24th International Conference on Material Forming (ESAFORM 2021) | Datei |
    DOI: 10.25518/esaform21.954
  • Behrens, Bernd-Arno; Uhe, Johanna; Petersen, Tom; Klose, Christian; Thürer, Susanne E.; Diefenbach, Julian; Chugreeva, Anna (2021): Challenges in the Forging of Steel-Aluminum Bearing BushingsMaterials 14(4), S. 1-14
    DOI: https://doi.org/10.3390/ma14040803
  • Behrens, Bernd-Arno; Wester, Hendrik; Schäfer, Stefan, Büdenbender, Christoph (2021): Modelling of an induction heating process and resulting material distribution of a hybrid semi-finished product after impact extrusion24th International ESAFORM Conference on Material Forming – ESAFORM 2021, online, 2021 | Datei |
    DOI: 10.25518/esaform21.574
  • Behrens, Bernd-Arno; Wester, Hendrik; Uhe, Johanna, Büdenbender, Christoph (2021): Numerical study on the influence of the initial temperature distribution on the material flow during die forging of a semi-finished aluminium-titanium productCongress of the German Academic Association for Production Technology (WGP), September 2021, Dresden, S. 122-130 | Datei |
    DOI: 10.1007/978-3-030-78424-9_14
  • Behrens, Bernd-Arno;Maier, Hans-Jürgen; Poll, Gerhard; Ludger,Overmeyer; Wester, Hendrik; Uhe, Johanna; Hassel, Thomas; Pape,Florian; Lammers, Marius; Hermsdorf, Joerg; Kaierle, Stefan; Budde, Laura; Saure, Felix; Mildebrath, Maximilian; Coors, Timm; Faqiri, Mohamad Yusuf; Büdenbender, Christoph (2021): Influence of degree of deformation in welding pore reduction in high-carbon steelsProduction Engineering 15, 161-168 | Datei |
    DOI: https://doi.org/10.1007/s11740-020-01009-z
  • Böhm, C.; Hudobivnik, B.; Aldakheel, F.; Wriggers, P. (2021): Modeling of Single-Slip Finite Strain Crystal Plasticity via the Virtual Element MethodProceedings in Applied Mathematics and Mechanics | Datei |
    DOI: 10.1002/pamm.202000205
  • Böhm, C.; Hudobivnik, B.; Aldakheel, F.; Wriggers, P. (2021): Virtual Element Method for finite strain crystal plasticityConference: 14th WCCM-ECCOMAS Congress, Minisymposium 378 | Datei |
    DOI: 10.113140/RG.2.2.25397.50401
  • Böhm, C.; Hudobivnik, B.; Marino, M.; Wriggers, P. (2021): Electro-magneto-mechanically response of polycrystalline materials: Computational homgenization via the Virtual Element MethodComputer Methods in Applied Mechanics and Engineering
    DOI: 10.1016/j.cma.2021.113775
  • Böhm, C.; Hudobivnik, B.; Marino, M.; Wriggers, P. (2021): Multiphysics response of polycrystalline materials: Computational homogenization via the Virtual Element MethodConference: Polygonal methods for PDEs: theory and applications | Datei |
  • Böhm, C.; Hudobivnik, B.; Marino, M.; Wriggers, P. (2021): The Virtual Element Method for the numerical homogenization of electro-mechanical responsesProceedings in Applied Mathematics and Mechanics | Datei |
    DOI: 10.1002/pamm.202000106
  • Budde, Laura; Lammers, Marius; Hermsdorf, Jörg; Kaierle, Stefan; Overmeyer, Ludger (2021): Process development for laser hot-wire deposition welding with high-carbon cladding material AISI52100Proceedings of LiM 2021, Wissenschaftliche Gesellschaft Lasertechnik e.V. | Datei |
  • Büdenbender C., Ross I., Wester H., Zaitsev A., Behrens B.A. (2021): Numerical Investigation of an Extruded Shaft for High Temperature Applications Manufactured by Tailored FormingProduction at the leading edge of technology. WGP 2020. Lecture Notes in Production Engineering. Springer, Berlin, Heidelberg
    DOI: 10.1007/978-3-662-62138-7_19
  • Denkena B.; Behrens B-A.; Bergmann B.; Stonis, M.; Kruse, J.; Witt M. (2021): Potential of process information transfer along the process chain of hybrid components for process monitoring of the cutting processProduction Engineering 2021, 15, S.199-209 | Datei |
    DOI: 10.1007/s11740-021-01023-9
  • Denkena B.; Bergmann B.; Witt M. (2021): Feeling machine for process monitoring of components with stock allowanceMachines 2021, 9, 53 | Datei |
    DOI: 10.3390/machines9030053
  • Denkena, B.; Breidenstein, B.; Maiß, O.; Krödel, A.; Prasanthan, V. (2021): Hochdynamisches Festwalzwerkzeug - Neue Möglichkeiten zur innovativen Oberflächenbehandlung von FunktionsbauteilenWT WERKSTATTSTECHNIK BD. 111 (2021) NR. 11-12 | Datei |
    DOI: 0.37544/1436–4980–2021–11–12–82
  • Fuhg, J.N.; Böhm, C.; Bouklas, N.; Fau, A.; Wriggers, P.; Marino, M. (2021): Model-data-driven constitutive responses: Application to a multiscale computational frameworkInternational Journal of Engineering Science
    DOI: 10.1016/j.ijengsci.2021.103522
  • Gerstein, G.; Kahra, C.; Golovko, O.; Schäfke, F.; Klose, C.; Herbst, S.; Nürnberger, F.; Maier, H. J. (2021): Hot forming of shape memory alloys in steel shells: formability, interface, bonding qualityProd. Eng. Res. Devel. 481–482, 2021 (3), 266. | Datei |
    DOI: 10.1007/s11740-021-01024-8
  • Grajczak, J.; Nowroth, C.; Twiefel, J.; Wallaschek, J.; Nothdurft, S.; Hermsdorf, J.; Wesling, V.; Kaierle, S. (2021): Investigations on the Weld Seam Geometry of Ultrasonic Assisted Laser Beam Welded Round Bars in and Beside Antinode PositionProceedings of LiM, 21.-24.06.2021 (online), Wissenschaftliche Gesellschaft Lasertechnik e.V. (WLT) | Datei |
  • Herrmann, Kevin; Altun, Osman; Wolniak, Philipp ; Mozgova, Iryna; Lachmayer, Roland (2021): Methodischer Aufbau von Entwicklungsumgebungen nach dem Generative Parametric Design ApproachSymposium Design for X (DFX2021), 27. und 28. September 2021, Tutzing, Germany | Datei |
    DOI: 10.35199/dfx2021.14
  • Herrmann, Kevin; Brockmöller, Tim; Gembarski, Paul Christoph ; Mozgova, Iryna; Lachmayer, Roland (2021): Fertigungsstufen-basiertes Gestaltungsmodell für mechanische BauteileStuttgarter Symposium für Produktentwicklung SSP 2021 | Datei |
  • Ince, CV.; Chugreeva, A.; Böhm, C.; Aldakheel, F.; Uhe, J.; Wriggers, P.; Behrens, B.-A.; Raatz, A. (2021): A design concept of active cooling for tailored forming workpieces during induction heatingProd. Eng. Res. Devel. 15, 177–186 (2021) | Datei |
    DOI: 10.1007/s11740-021-01027-5
  • J. Grajczak, C. Nowroth, T. Coors, J. Twiefel, J. Wallaschek, F. Saure, F. Pape, G. Poll, S. Nothdurft, J. Hermsdorf, V. Wesling, S. Kaierle (2021): Influence of process-related heat accumulation of laser beam welded 1.7035 round bars on weld pool shape and weld defectsJournal of Laser Applications | Datei |
    DOI: https://doi.org/10.2351/7.0000478
  • Kahra, C.; Nürnberger, F.; Maier, H. J.; Herbst, S. (2021): Heat Transfers Coefficients of Directly and Indirectly Cooled Component Areas during Air-Water Spray CoolingHTM 76, 2021 (1), 64-75 | Datei |
    DOI: 10.1515/htm-2020-0005
  • Lorenz, Quentin; Rüdiger, Beermann; Carl, Reinke; Pascal, Kern; Markus, Kästner; Eduard, Reithmeier (2021): Adapted Fringe Projection Sequences for Changing Illumination Conditions on the Example of Measuring a Wrought-Hot Object Influenced by Forced CoolingSensors 1599 (5)
    DOI: 10.3390/s21051599
  • Ohrdes, H.; Nothdurft, S.; Nowroth, C.; Grajczak, J.; Twiefel, J.; Hermsdorf, J.; Kaierle, S.; Wallaschek, J. (2021): Influence of the ultrasonic vibration amplitude on the melt pool dynamics and the weld shape of laser beam welded EN AW-6082 utilizing a new excitation system for laser beam weldingProd. Eng. Res. Devel. | Datei |
    DOI: 10.1007/s11740-020-01008-0
  • Thürer, S.E.; Chugreeva, A.; Heimes, N.; Uhe, J.; Behrens, B.-A.; Maier, H.J.; Klose, C. (2021): Process chain for the manufacture of hybrid bearing bushingsProd. Eng. Res. Devel. 15, 137–150 (2021) | Datei |
    DOI: 10.1007/s11740-021-01028-4
  • Barienti, K.; Kahra, C.; Herbst, S.; Nürnberger, F.; Maier, H. J. (2020): Ion Beam Processing for Sample Preparation of Hybrid Materials with Strongly Differing Mechanical PropertiesMetallogr. Microstruct. Anal. 9, 2020 (1), 54-60 | Datei |
    DOI: 10.1007/s13632-019-00605-5
  • Beermann, R.; Quentin, L.; Kästner, M.; Reithmeier, E. (2020): Calibration routine for a telecentric stereo vision system considering affine mirror ambiguityOptical Engineering | Datei |
    DOI: https://doi.org/10.1117/1.OE.59.5.054104
  • Behrens, B. A.; Diefenbach, J.; Chugreeva, A.; Kahra, C.; Herbst, S.; Nürnberger, F. (2020): Tailored Forming of Hybrid Bevel Gears with Integrated Heat Treatment23rd International Conference on Material forming - ESAFORM 2020. online. 04.05.-08.05.2020, Procedia Manufactoring 47, 2020, S. 301-308 | Datei |
    DOI: 10.1016/j.promfg.2020.04.234
  • Behrens, B.-A.; Chugreeva, A.; Diefenbach, J.; Kahra, C.; Herbst, S.; Nürnberger, F.; Maier, H. J. (2020): Microstructural Evolution and Mechanical Properties of Hybrid Bevel Gears Manufactured by Tailored FormingMetals 10, 2020 (10), 1365 | Datei |
    DOI: 10.3390/met10101365
  • Behrens, B.-A.; Diefenbach, J.; Ross, I. (2020): Optimierung des Werkstoffverbunds hybrider Stahl – Aluminium Bauteile beim Fließpressen und ReibschweißenTagungsband des 23. Umformtechnisches Kolloquium Hannover, Garbsen, 04. März 2020, TEWISS-Verlag | Datei |
    ISBN: 978-3-95900-423-7
  • Behrens, B.-A.; Duran, D.; Matthias, T.; Ross, I. (2020): Enhancement of the interface of friction welded steel aluminium jointsProduction Engineering, Springer Verlag, | Datei |
    DOI: https://doi.org/10.1007/s11740-020-00994-5
  • Behrens, B.-A.; Heimes, N.; Klose, C.; Thürer, S.E; Uhe, J. (2020): Development of a Modified Tool System for Lateral Angular Co-Extrusion to Improve the Quality of Hybrid ProfilesESAFORM 2020. Procedia Manufacturing, Volume 47, 2020, Pages 224-230, | Datei |
    DOI: https://doi.org/10.1016/j.promfg.2020.04.200
  • Behrens, B.-A.; Klose, C.; Thürer, S.; Heimes, N.; Uhe, J. (2020): Herstellung koaxialer Verbundprofile mittels Lateral Angular Co-ExtrusionBehrens, B.-A. (Hrsg.): Aktuelle Entwicklungen im Bereich der Umformtechnik; 23. Umformtechnisches Kolloquium Hannover. 04.03.-05.03.2020, Posterbeitrag, TEWISS, Garbsen, 2020
  • Behrens, B.-A.; Maier, H.J.; Klose, C.; Wester, H.; Thürer, S.E.; Heimes, N.; Uhe, J.; (2020): Characterization and Modeling of Intermetallic Phase Formation during the Joining of Aluminum and Steel in Analogy to Co-ExtrusionMetals 2020, 10(12), 1582 | Datei |
    DOI: https://doi.org/10.3390/met10121582
  • Behrens, B.-A.; Maier, H.J.; Poll, G.; Wriggers, P.; Aldakheel, F.; Klose, C.; Nürnberger, F.; Pape, F.; Böhm, C.; Chugreeva, A.; Coors, T.; Duran, D.; Thürer, S.E.; Herbst, S.; Hwang, J.-I.; Matthias, T.; Heimes, N.; Uhe, J. (2020): Numerical investigations regarding a novel process chain for the production of a hybrid bearing bushingProd. Eng. Res. Devel. 14, 569–581 (2020) | Datei |
    DOI: 10.1007/s11740-020-00992-7
  • Behrens, B.-A.; Uhe, J.; Petersen, T.; Nürnberger, F.; Kahra, C.; Ross, I.; Laeger, R. (2020): Contact Geometry Modification of Friction-Welded Semi-Finished Products to Improve the Bonding of Hybrid ComponentsMetals Special Issue, Springer Verlag 2020 | Datei |
    DOI: https://doi.org/10.3390/met11010115
  • Behrens, Bernd-Arno; Ross, Ingo; Wester, Hendrik; Zaitsev, A.; Büdenbender, Christoph (2020): Numerical Investigation of an Extruded Shaft for High Temperature Applications Manufactured by Tailored FormingCongress of the German Academic Association for Production Technology (WGP), September 2020, S. 182-192 | Datei |
    DOI: 10.1007/978-3-662-62138-7_19
  • Behrens, Bernd-Arno; Uhe, Johanna; Wester, Hendrik; Matthias, Tim; Büdenbender, Christoph (2020): FE-based Layer Design of Deposition-Welded Semi-finished Parts for the Production of Hybrid Bevel GearProcedia Manufacturing 47, 309-314 | Datei |
    DOI: 10.1016/j.promfg.2020.04.235
  • Berend Denkena, B., Bergmann, B.,Witt, M. (2020): Feeling Machine for Process Monitoring of Turning Hybrid Solid ComponentsMetals 2020, 10(7), 930 | Datei |
    DOI: 10.3390/met10070930
  • Bergmann B., Witt M. (2020): Feeling machine for material-specific machiningCIRP Annals | Datei |
  • Breidenstein, B.; Denkena, B.; Prasanthan, V. (2020): Einfluss von Randzoneneigenschaften auf die Strukturfestigkeit hybrider BauteileTagungsband zum 23. Umformtechnisches Kolloquium Hannover, 04.-05.03.2020, Hannover | Datei |
    ISBN: ISBN 978-3-95900-423-7
  • Breidenstein, Bernd; Denkena, Berend; Krödel, Alexander; Prasanthan, Vannila; Poll, Gerhard; Pape, Florian; Coors, Timm (2020): Production-Related Surface and Subsurface Properties and Fatigue Life of Hybrid Roller Bearing ComponentsMetals 2020, 10(10), 1339 | Datei |
    DOI: https://doi.org/10.3390/met10101339
  • Breidenstein, Bernd; Denkena, Berend; Meyer, Kolja; Prasanthan, Vannila (2020): Influence of subsurface properties on the application behavior of hybrid componentsProcedia CIRP 87 (2020) 302–308 | Datei |
    DOI: 10.1016/j.procir.2020.02.116
  • Brockmöller, Tim; Siqueira, Renan; Gembarski, Paul Christoph; Mozgova, Iryna; Lachmayer, Roland (2020): Computer-Aided Engineering Environment for Designing Tailored Forming ComponentsMetals 2020 10(12) | Datei |
    DOI: 10.3390/met10121589
  • Brockmöller, Tim; Siqueira, Renan; Mozgova, Iryna; Lachmayer, Roland (2020): Operationalization of Manufacturing Restrictions for Hybrid Tailored Forming ComponentsConference on Future Production of Hybrid Structures, 27–28th May 2020, Wolfsburg, Germany | Datei |
  • Coors, T.; Mildebrath, M.; Büdenbender, C.; Saure, F.; Faqiri, M. Y.; Kahra, C.; Prasanthan, V.; Chugreeva, A.; Matthias, T.; Budde, L.; Pape, F.; Nürnberger, F.; Hassel, T.; Hermsdorf, J.; Overmeyer, L.; Breidenstein, B.; Denkena, B.; Behrens, B.-A.; Maier, H. J.; Poll, G. (2020): Investigations on Tailored Forming of AISI 52100 as Rolling Bearing RacewayMetals 10, 2020 (10), 1363 | Datei |
    DOI: 10.3390/met10101363
  • Coors, T.; Pape, F.; Kruse, J.; Blohm, T.; Beermann, R.; Quentin, L.; Herbst, S.; Langner, J.; Stonis, M.; Kästner, M.; Reithmeier, E.; Nürnberger, F.; Poll, G. (2020): Simulation assisted process chain design for the manufacturing of bulk hybrid shafts with tailored propertiesThe International Journal of Advanced Manufacturing Technology 108, 2409-2417 | Datei |
    DOI: https://doi.org/10.1007/s00170-020-05532-2
  • Denkena, B.; Bergmann, B.; Handrup, M.; Witt, M. (2020): Material identification during turning by neural networkJournal of Machine Engineering, Vol. 20, No. 2, S.65–76 | Datei |
    DOI: 10.36897/jme/119677
  • Denkena, B.; Bergmann, B.; Reimer, S.; Schmidt, A.; Stiehl, T.; Witt, M. (2020): KI gestützte Prozessüberwachung in der ZerspanungZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, Band 115, Ausgabe 5, Mai 2020, S.295-298 | Datei |
    DOI: 10.3139/104.112282
  • Denkena, B.; Breidenstein, B.; Krödel, A.; Prasanthan, V. (2020): Chip formation in machining hybrid components of SAE1020 and SAE5140Production Engineering (2021) 15:187–197 | Datei |
    DOI: https://doi.org/10.1007/s11740-020-00993-6
  • Grajczak, J.; Nowroth, C.; Nothdurft, S.; Hermsdorf, J.; Twiefel, J.; Wallaschek, J.; Kaierle, S. (2020): Influence of Ultrasound on Pore and Crack Formation in Laser Beam Welding of Nickel-Base Alloy Round BarsMetals 2020, 10(10), 1299; Special Issue on Hybrid Bulk Metal Components | Datei |
    DOI: 10.3390/met10101299
  • Heimes, N.; Uhe, J.; Thürer, S.E.; Wester, H.; Maier, H.J:; Klose, C.; Behrens, B.-A. (2020): Numerical Development of a Tooling System for the Co-Extrusion of Asymmetric Compound Profiles on a Laboratory ScaleProduction at the leading edge of technology. WGP 2020. Lecture Notes in Production Engineering. Springer, Berlin, Heidelberg. pp 66-75 | Datei |
    DOI: https://doi.org/10.1007/978-3-662-62138-7_7
  • Ince, C.-V.; Geggier, J.; Bruns, C.; Raatz, A. (2020): Development of a form-flexible handling technology with active cooling for hybrid components in forging processes8th CIRP Conference of Assembly Technology and Systems | Datei |
    DOI: https://doi.org/10.1016/j.procir.2020.05.200
  • Kahra, C.; Herbst, S.; Nürnberger F. (2020): Wärmebehandlung für belastungsangepasste Werkstoffeigenschaften von Tailored-Forming-KomponentenTagungsband des 23. Umformtechnisches Kolloquium Hannover
  • Kloock-Schreiber, Daniel; Brockmöller, Tim; Schneider, Jannik; Gembarski, Paul Christoph; Mozgova, Iryna; Lachmayer, Roland (2020): TRIZ-Reverse for PSS potential determination9th International Conference on Mass Customizaon and Personalization – Community of Europe (MCP - CE 2020, September 23-25, 2020, Novi Sad, Serbia | Datei |
  • Kruse, J.; Mildebrath, M.; Budde, L.; Coors, T.; Faqiri, M.Y.; Barroi, A.; Stonis, M.; Hassel, T.; Pape, F.; Lammers, M.; Hermsdorf, J.; Kaierle, S.; Overmeyer, L.; Poll, G. (2020): Numerical Simulation and Experimental Validation of the Cladding Material Distribution of Hybrid Semi-Finished Products Produced by Deposition Welding and Cross-Wedge RollingMetals 2020, 10, 1336 | Datei |
    DOI: 10.3390/met10101336
  • Kruse, J.; Mildebrath, M.; Budde, L.; Coors, T.; Faqiri, M.Y.; Barroi, A.; Stonis, M.; Hassel, T.; Pape, F.; Lammers, M.; Hermsdorf, J.; Kaierle, S.; Overmeyer, L.; Poll, G. (2020): Numerical Simulation and Experimental Validation of the Cladding Material Distribution of Hybrid Semi-Finished Products Produced by Deposition Welding and Cross-Wedge RollingMetals | Datei |
    DOI: https://www.mdpi.com/2075-4701/10/10/1336
  • Lorenz, Quentin; Rüdiger, Beermann; Kai, Brunotte; Bernd-Arno, Behrens; Markus, Kästner; Eduard, Reithmeier (2020): Concept of a control system based on 3D geometry measurement for open die forging of large-scale componentsProc. SPIE 11352, Optics and Photonics for Advanced Dimensional Metrology, 113520B (1. April 2020)
    DOI: 10.1117/12.2554720
  • Nothdurft, S.; Ohrdes, H.; S.; Ohrdes, H.; Twiefel, J.; Wallaschek, J.; Hermsdorf, J.; Overmeyer, L.; Kaierle, S. (2020): Investigations on the effect of different ultrasonic amplitudes and positions in the vibration distribution on the microstructure of laser beam welded stainless steelProc. SPIE 11273, High-Power Laser Materials Processing: Applications, Diagnostics, and Systems IX | Datei |
    DOI: 10.1117/12.2566035
  • Nowroth, C.; Grajczak, J.; Nothdurft, S.; Hermsdorf, J.; Twiefel, J.; Kaierle, S.; Wallaschek, J. (2020): Introducing the concept of self-sensing for ultrasonic assisted laser beam welding of 1.4301 stainless steel and 2.4856 nickel alloyThe 17th International Workshop on Piezoelectric Materials and Applications in Actuators | Datei |
  • Nowroth, C.; Nothdurft, S.; Hermsdorf, J.; Kaierle, S.; Twiefel, J.; Wallaschek, J. (2020): Detektion und Interpretation von Schwingungen beim Laserstrahlschweißen unter Einsatz eines optischen Mikrofons22. Umformtechnisches Kolloquium Hannover – Innovationspotentiale in der Umformtechnik | Datei |
  • Quentin, L.; Beermann, R.; Kästner, M.; Reithmeier, E. (2020): Development of a reconstruction quality metric for optical threedimensional measurement systems in use for hot-state measurement objectOptical Engineering | Datei |
    DOI: https://doi.org/10.1117/1.OE.59.6.064103
  • Quentin, L.; Reinke, C.; Beermann, R.; Kästner, M.; Reithmeier, E. (2020): Design, Setup, and Evaluation of a Compensation System for the Light Deflection Effect Occurring When Measuring Wrought-Hot Objects Using Optical Triangulation Methodsmetals | Datei |
    DOI: doi:10.3390/met10070908
  • Rüdiger, Beermann; Lorenz, Quentin; Markus, Kästner; Eduard, Reithmeier (2020): Affine structured light sensor for measurements through inspection windows: basic concept and direct calibration approachProc. SPIE 11352, Optics and Photonics for Advanced Dimensional Metrology, 113520E (1. April 2020)
    DOI: 10.1117/12.2556081
  • Thürer, S. E. (2020): Prozessentwicklung für das Verbundstrangpressen hybrider Hohlprofile aus Aluminium und StahlDissertation, Berichte aus dem IW 01/2020, Garbsen: TEWISS Verlag
    ISBN: ISBN: 978-3-95900-484-8
  • Thürer, S. E.; Peddinghaus, J.; Heimes, N.; Caner Bayram, F.; Bal, B.; Uhe, J.; Behrens, B.-A.; Maier, H. J.; Klose, C. (2020): Lateral Angular Co-Extrusion: Geometrical and Mechanical Properties of Compound ProfilesMetals 10, 2020, 1162 | Datei |
    DOI: 10.3390/met10091162
  • Beermann, Rüdiger; Quentin, Lorenz; Kästner, Markus; Reithmeier, Eduard (2019): Structured light sensor with telecentric stereo camera pair for measurements through vacuum windowsProc. SPIE 11056, Optical Measurement Systems for Industrial Inspection XI, 1105614, 21. Juni 2019
    DOI: 10.1117/12.2526049
  • Behrens, B.-A.; Klose, C.; Thürer, S.; Heimes, N.; Uhe, J. (2019): Numerical modeling of the development of intermetallic layers between aluminium and steel during co-extrusionLander Galdos, L. et al. (Hrsg.): Proceedings of the 22nd international ESAFORM conference on material forming: ESAFORM 2019. Vitoria-Gasteiz, Spanien. 08.05. – 10.05.2019, S. 40029 | Datei |
    DOI: https://doi.org/10.1063/1.5112563
  • Behrens, B.-A.; Sokolinskaja, V.; Chugreeva, A.; Diefenbach, J.; Thürer, S.; Bohr, D (2019): Investigation into the bond strength of the joining zone of compound forged hybrid aluminium-steel bearing bushingLander Galdos, L. et al. (Hrsg.): Proceedings of the 22nd international ESAFORM conference on material forming: ESAFORM 2019. Vitoria-Gasteiz, Spanien. 08.05. – 10.05.2019, S. 40028 | Datei |
    DOI: https://doi.org/10.1063/1.5112562
  • Denkena, Berend; Dittrich, Marc-André; Stamm, Siebo Claas; Prasanthan, Vannila (2019): Knowledge-based process planning for economical re-scheduling in production controlProcedia CIRP 81, S. 980-985 | Datei |
    DOI: 10.1016/j.procir.2019.03.238
  • Lorenz, Quentin; Jens, Kruse; Rüdiger, Beermann; Carl, Reinke; Jan, Langner; Malte, Stonis; Markus, Kästner; and Eduard, Reithmeier (2019): Analysis of mapped temperature data on geometry points to characterize the influence of temperature deviations on cross-wedge rollingAIP Conference Proceedings 2113, 040018
    DOI: 10.1063/1.5112552
  • Nothdurft, S.; Ohrdes, H.; S.; Ohrdes, H.; Twiefel, J.; Wallaschek, J.; Mildebrath, M.; Maier, H. J.; Hassel, T.; Overmeyer, L.; Kaierle, S. (2019): Influence of ultrasonic amplitude and position in the vibration distribution on the microstructure of a laser welded aluminum alloyJournal of Laser Applications, 31, 2 | Datei | Weitere Informationen
  • Pape, F.; Coors, T.; Chugreev, A.; Matthias, T.; Uhe, J.; Thürer, S.; Klose, C.; Behrens, B.-A., Poll, G. (2019): Ultrasonic evaluation of tailored forming bearing components12th International Symposium on Rolling Bearing Steels – Progress in Bearing Steel Metallurgical Testing and Quality Assurance. Denver. 15.05.-17.05.2019 | Datei |
    DOI: https://doi.org/10.13140/RG.2.2.28034.53443
  • Sheveleva, Tatyana; Hermann, Kevin; Wawer, Max Leo; Kahra, Christoph; Nürnberger, Florian; Koepler, Oliver; Mozgova, Iryna; Lachmayer, Roland; Auer, Sören (2019): Ontology-Based Documentation of Quality Assurance Measures Using the Example of a Visual InspectionAdvances in System-Integrated Intelligence, Springer
    DOI: 10.1007/978-3-031-16281-7_39
  • Siqueira, Renan; Altun, Osman; Gembarski, Paul; Lachmayer, Roland (2019): A Hydraulic Delta-Robot-Based Test Bench for Validation of Smart ProductsPerspectives in Dynamical Systems I: Mechatronics and Life Sciences, DSTA, 2.-5.12.2019,Lodz, Polen
    DOI: 10.1007/978-3-030-77306-9_6
    ISBN: 978-3-030-77306-9
  • Siqueira, Renan; Bibani, Mehdi; Duran, Deniz; Mozgova, Iryna; Lachmayer, Roland; Behrens, Bernd-Arno (2019): An adapted case-based reasoning system for design andmanufacturing of tailored forming multi-material componentsInternational Journal on Interactive Design and Manufacturing (IJIDeM) 13, S. 1175-1184 | Datei |
    DOI: 10.1007/s12008-019-00566-7
  • Siqueira, Renan; Shugar, Sean; Mozgova, Iryna; Lachmayer, Roland (2019): Design of Hybrid Components Joining Zone through Sensitivity AnalysisProceedings of the 22nd International Conference on Engineering Design (ICED19), Delft, The Netherlands, 5-8 August 2019 | Datei |
    DOI: 10.1017/dsi.2019.276
  • Beermann, R.; Müller, T.; Reithmeier, E. (2018): Optisches MesssystemPatentnummer: DE 10 2017 101 446 A1 Anmeldetag: 25.01.2017 Offenlegungstag: 26.07.2018 Veröffentlichungstag der Patenterteilung: noch nicht erteilt
  • Beermann, R.; Quentin, L.; Reithmeier, E.; Kästner, M. (2018): Fringe projection system for high-temperature workpieces–design, calibration, and measurementAppl. Opt. 57 (15) Seitenzahl: pp. 4075-4089 | Datei |
    DOI: 10.1364/AO.57.004075
  • Beermann, R.; Quentin, L.; Reithmeier, E.; Kästner, M. (2018) (2018): 2D refractive index field measurements in air in different pressure scenariosProceedings of SPIE 10819, SPIE Photonics 11. – 13. October 2018, Beijing, China Seitenzahl: pp. 108190E-1 - 108190E-8 | Datei |
    DOI: 10.1117/12.2500315
  • Beermann, R.; Quentin, L.; Stein, G.; Reithmeier, E.; Kästner, M. (2018): Full simulation model for laser triangulation measurement in an inhomogeneous refractive index fieldOptical Engineering 57 (11) Seitenzahl: pp. (114107-)1 -(114107-)13 | Datei |
    DOI: 10.1117/1.OE.57.11.114107
  • Behrens, B.-A.; Chugreev, A.; Matthias, T. (2018): Characterisation of the joining zone of serially arranged hybrid semi-finished componentsAIP Conference Proceedings 1960, 040002 (2018) | Datei |
    DOI: 10.1063/1.5034856
  • Behrens, B.-A.; Chugreev, A.; Matthias, T. (2018): Hybride Lagerbuchsen aus Aluminium und Stahl*wt Werkstatttechnik online Jahrgang 108 (2018) H. 10 | Datei |
  • Behrens, B.-A.; Chugreev, A.; Matthias, T.; Nothdurft, S.; Hermsdorf, J.; Kaierle, S.; Ohrdes, H.; Twiefel, J.; Wallaschek, J.; Mildebrath, J.; Hassel, T. (2018): Investigation of the composite strength of hybrid steel-steel semi-finished products manufactured by laser beam welding and friction weldingIOP Conf. Series: Materials Science and Engineering 461 (2019) 012049 | Datei |
    DOI: 10.1088/1757-899X/461/1/012049
  • Behrens, B.-A.; Chugreeva, A.; Mildebrath, M.; Diefenbach, J.; Barroi, A.; Lammers, M.; Hermsdorf, J.; Hassel, T.; Overmeyer, L. (2018): Manufacturing of High-Performance Bi-Metal Bevel Gears by Combined Deposition Welding and ForgingMetals 2018, 8, 898 | Datei |
    DOI: 10.3390/met8110898
  • Behrens, B.-A.; Goldstein, R., Chugreeva, A. (2018): Thermomechanical Processing for Creating Bi-Metal Bearing BushingsThermal Processing in Motion 2018—Conference Proceedings of the Thermal Processing in Motion, June 5-7, 2018, Spartanburg, South Carolina, USA, pp. 15-21 | Datei |
  • Behrens, B.-A.; Goldstein, R.; Guisbert, D.; Duran, D. (2018): Thermomechanical Processing of Friction Welded Steel-Aluminum Billets to Improve Joining Zone Properties4th International Conference on Heat Treatment and Surface Engineering in Automotive Applications (Thermal Processing in Motion), 5.-7. Juni, Spartanburg, North Carolina, USA. | Datei |
  • Behrens, B.-A.; Klose, C.; Chugreev, A.; Thürer, S. E.; Uhe, J. (2018): Numerical Investigations on the Lateral Angular Co-Extrusion of Aluminium and SteelAIP Conference Proceedings 1960, 030001 | Datei |
    DOI: http://dx.doi.org/10.1063/1.5034844
  • Bernd-Arno Behrens, Christian Klose, Alexander Chugreev, Norman Heimes, Susanne Elisabeth Thürer, Johanna Uhe (2018): A Numerical Study on Co-Extrusion to Produce Coaxial Aluminum-Steel Compounds with Longitudinal Weld SeamsMetals, 8, 717 | Datei |
  • Blohm, T.; Nothdurft, S.; Mildebrath, M.; Ohrdes, H.; Richter, J.; Stonis, M.; Langner, J.; Springer, A.; Kaierle, S.; Hassel, T.; Wallaschek, J.; Overmeyer, L.; Behrens, B.-A. (2018): Investigation of the joining zone of laser welded and cross wedge rolled hybrid partsInternational Journal of Material Forming 11 (6) 829-837 | Datei |
  • Breidenstein, B.; Prasanthan, V. (2018): Analyse der Oberflächen- und Randzoneneigenschaften von US-laserstrahlgeschweißten VerbundwellenArbeitstreffen „Energiedispersive Röntgenbeugung“, 22. November 2018, Kassel, 23 Seiten | Datei |
  • Denkena, B.; Bergmann, B.; Breidenstein, B.; Prasanthan, V.; Witt, M. (2018): Analysis of potentials to improve the machining of hybrid workpiecesProduction Engineering Research and Development, Published Online: 19th December 2018, 9 Seiten | Datei |
    DOI: 10.1007/s11740-018-00870-3
  • Denkena, B.; Bergmann, B.; Witt M. (2018): Investigations on a predictive process parameter adaptation for machining of hybrid workpiecesCIRP Journal of Manufacturing Science and Technology | Datei |
    DOI: https://doi.org/10.1016/j.cirpj.2018.10.004
  • Denkena, B.; Bergmann, B.; Witt, M. (2018): Material identification based on machine-learning algorithms for hybrid workpieces during cylindrical operationsJournal of Intelligent Manufacturing | Datei |
    DOI: https://doi.org/10.1007/s10845-018-1404-0
  • Denkena, B.; Bergmann; B.; Witt, M. (2018): Impact of hybrid workpieces on statistical process monitoring of machining operationsThe International Journal of Advanced Manufacturing Technology, 10.08.2018 | Datei |
    DOI: https://doi.org/10.1007/s00170-018-2534-4
  • Denkena, B.; Breidenstein, B.; Grove, T.; Prasanthan, V.; Overmeyer, L.; Nothdurft, S.; Kaierle, S.; Wallaschek, J.; Twiefel, J.; Ohrdes, H.; Maier, H.J.; Hassel, T.; Mildebrath, M. (2018): Surface integrity of turned laser-welded hybrid shaftsProduction Engineering Research and Development, Published online: 04th December 2018, 9 Seiten | Datei |
    DOI: 10.1007/s11740-018-0862-8
  • Denkena, B.; Breidenstein, B.; Prasanthan, V. (2018): Influence of Tool Properties on the Thermomechanical Load during Turning of Hybrid Components and the Resulting Surface PropertiesHTM, Journal of Heat Treatment and Materials, Band 73, Ausgabe 4, S. 223-231 | Datei |
  • Herbst, S. (2018): Inverse Prozessauslegung der prozessintegrierten Wärmebehandlung von Großschmiedebauteilen mittels Luft-Wasser-SpraykühlungDissertation, Berichte aus dem IW 05/2018, Garbsen: TEWISS Verlag ISBN: 978-3-95900-237-0 | Datei |
  • Herbst, S.; Maier, H. J.; Nürnberger, F. (2018): Strategies for the Heat Treatment of Steel-Aluminium Hybrid ComponentsHTM Journal of Heat Treatment and Materials, 73(5) | Datei |
    DOI: 10.3139/105.110368
  • Herbst, S.; Nürnberger, F. (2018): Characterization of Heat Transfer in Complex Air-Water Spray Quenching Set-UpsInternational Conference on Quenching and Distortion Engineering (QDE), 27.-29. November 2018, Nagoya, Japan | Datei |
  • Merkel, Paulina; Budde, Laura; Grajczak, Jan; Nowroth, Christian; Prasanthan, Vannila; Kriwall, Mareile; Lammers, Marius; Nothdurft, Sarah; Hermsdorf, Jörg; Twiefel, Jens; Overmeyer, Ludger; Kaierle, Stefan; Wallaschek, Jens; Breidenstein, Bernd; Behrens, Bernd-Arno; Stonis, Malte (2018): Feasibility study for the manufacturing of hybrid pinion shafts with the cross-wedge rolling processInternational Journal of Material Forming 16(45) | Datei |
    DOI: 10.1007/s12289-023-01761-4
  • Nothdurft, S.; Ohrdes, H.; S.; Ohrdes, H.; Twiefel, J.; Wallaschek, J.; Mildebrath, M.; Maier, H. J.; Hassel, T.; Overmeyer, L.; Kaierle, S. (2018): Influence of ultrasonic amplitude and position in the vibration distribution on the microstructure of a laser welded aluminum alloyInternational Congress on Applications of Lasers & Electro-Optics (ICALEO®), 14.-18.10.2018, Orlando | Datei |
  • Nothdurft, S.; Seffer, O.; Lahdo, R.; Hermsdorf, J.; Kaierle, S. (2018): Laser beam joining of dissimilar joints of steel and aluminium alloysWelding and Cutting, Jhg. 17, Heft 5 | Datei |
  • Nothdurft, S.; Springer, A.; Kaierle, S (2018): Influencing the weld pool during laser welding.Lawrence, J. (Editor): Advances in Laser Materials Processing Technology: Research and Applications 2nd Edition (235-256) | Datei |
    DOI: https://doi.org/10.1016/B978-0-08-101252-9.00010-8
  • Nothdurft, S.; Springer, A.; Kaierle, S.; Ohrdes, H.; Twiefel, J.; Wallaschek, J.; Mildebrath, M.; Maier, H. J.; Hassel, T.; Overmeyer, L. (2018): Laser welding of dissimilar low-alloyed steel-steel butt joints and the effects of beam position and ultrasound excitation on the microstructureJournal of Laser Applications, 30, 3, 032417-1 bis 032417-6 | Datei |
  • Quentin, L.; Beermann, R.; Pösch, A.; Reithmeier, E.; Kästner, M. (2018): Enhanced measurement routine for optical 3D geometry measurement of hot specimen by reduction of ambient pressureEngineering for a Changing World: Proceedings; 59th IWK, Ilmenau Scientific Colloquium, Technische Universität Ilmenau, September 11-15, 2017, vol. 59, no. 1. Zitierlink: https://nbn-resolving.org/urn:nbn:de:gbv:ilm1-2017iwk-065:1 | Datei |
  • Siqueira, R.; Bibani, M.; Mozgova, I.; Lachmayer, R. (2018): Case-Based Parametric Analysis: A Method for Design of Tailored Forming Hybrid Material ComponentProceedings of 39th International Conference on Information Systems Architecture and Technology – ISAT 2018, Springer | Datei |
    DOI: https://doi.org/10.1007/978-3-319-99996-8_2
    ISBN: 978-3-319-99995-1
  • Siqueira, R.; Bibani, M.; Mozgova, I.; Lachmayer, R. (2018): A Case-based Reasoning Approach for Design of Tailored Forming Hybrid Material ComponentProceedings of 41st Solid Mechanics Conference, August 27-31, Warsaw, Poland, http://solmech2018.ippt.pan.pl/ | Datei |
  • Siqueira, R.; Mozgova, I.; Lachmayer, R. (2018): An Interfacial Zone Evolutionary Optimization Method With Manufacturing Constraints For Hybrid ComponentsJournal of Computational Design and Engineering | Datei |
    DOI: https://doi.org/10.1016/j.jcde.2018.10.003
  • Siqueira, R.; Mozgova, I.; Lachmayer, R. (2018): A Multi-material Optimization Method with Manufacturing Constraints for Tailored FormingProceedings of 41st Solid Mechanics Conference, August 27-31, Warsaw, Poland, http://solmech2018.ippt.pan.pl/ | Datei |
  • Baldrich, M.; Zeller, S.; Loehnert, S.; Wriggers, P. (2017): Modelling the thermoplastic material behaviour of a tailored formed joining zone on a microscopic length scale with focus on the steel componentProceedings in Applied Mathematics and Mechanics 17 | Datei |
    DOI: 10.1002/pamm.201710165
  • Beermann, R.; Quentin, L.; Kästner, M.; Pösch, A.; Reithmeier E. (2017): Simulation of Light Deflection Due to an Inhomogeneous Refractive Index Field Induced by a Hot Measurement ObjectProceedings of the 118th Annual Meeting of DGaO, DGaO 06. - 10. Juni 2017, Dresden, Deutschland, Link zur PDF: https://www.dgao-proceedings.de/download/118/118_a20.pdf, ISSN: 1614-8436 | Datei |
  • Beermann, R.; Quentin, L.; Kästner, M.; Pösch, A.; Reithmeier, E. (2017): Brechungsindexbestimmung zur Umsetzung hochgenauer 3D-Messungen an warmen Tailored Forming BauteilenInnovationspotenziale in der Umformtechnik, 22. Umformtechnisches Kolloquium Hannover, 15.-16. März 2017, PZH Verlag, Garbsen. | Datei |
  • Beermann, R.; Quentin, L.; Pösch, A.; Reithmeier, E.; Kästner, M. (2017): Background oriented schlieren measurement of the refractive index field of air induced by a hot, cylindrical measurement objectAppl. Opt. 56 (14) Seitenzahl: pp. 4168-4179 | Datei |
    DOI: 10.1364/AO.56.004168
  • Beermann, R.; Quentin, L.; Pösch, A.; Reithmeier, E.; Kästner, M. (2017): Light Section Measurement to Quantify the Accuracy Loss Induced by Laser Light Deflection in an Inhomogeneous Refractive Index FieldIn: Proceedings of SPIE 10329, SPIE Optical Metrology 25. - 29. June 2017, Munich, Germany Seitenzahl: pp. 103292T-1-103292T-7 | Datei |
    DOI: 10.1117/12.2269724
  • Behrens B.-A.; Bouguecha, A.; Bonk, B.; Matthias, T. (2017): Experimentell-numerische Methode zur Vorhersage der Schädigung und des Versagens von Fügezonen in Hybridhalbzeugen während der UmformungInnovationspotenziale in der Umformtechnik, 22. Umformtechnisches Kolloquium Hannover, 15.-16. März 2017, PZH Verlag, Garbsen, S. 201 | Datei |
  • Behrens, B.-A.; Bouguecha, A.; Bonk, C.; Bonhage, M.; Chugreeva, A.; Matthias, T. (2017): FE-based Design of a Forging Tool System for a Hybrid Bevel GearKey Engineering Materials; ISSN: 1662-9795, Vol. 742, pp 544-551; doi:10.4028 / www.scientific.net/KEM.742.544 | Datei |
  • Behrens, B.-A.; Bouguecha, A.; Bonk, C.; Matthias, T. (2017): Importance of material and friction characterisation for FE-aided process design of hybrid bevel gearsAIP Conference Proceedings 1896, 190016 (2017) | Datei |
    DOI: 10.1063/1.5008229
  • Behrens, B.-A.; Bouguecha, A.; Frischkorn, C.; Huskic, A.; Chugreeva, A. (2017): Process Routes for Die Forging of Hybrid Bevel Gears and Bearing BushingsESAFORM 2017, 26.-28.04.2017, Dublin, Ireland | Datei |
  • Behrens, B.-A.; Bouguecha, A.; Moritz, J.; Bonk, C.; Stonis, M.; Klose, C.; Blohm, T.; Chugreeva, A.; Duran, D.; Matthias, T.; Golovko, O.; Thürer, S. E.; Uhe, J. (2017): Aktuelle Forschungsschwerpunkte in der Massivumformung22. Umformtechnisches Kolloquium Hannover, 15.-16.03.2017 | Datei |
  • Behrens, B.-A.; Goldstein, R.; Duran, D. (2017): Role of Thermal Processing in Tailored Forming Technology for Manufacturing Multi-Material ComponentsHeat Treat 2017: Proceedings of the 29th ASM Heat Treating Society Conference, October 24-26, Columbus, Ohio, USA | Datei |
  • Blohm, T.; Langner, J.; Stonis, M.; Behrens, B.-A. (2017): Basic study of incremental forming of serially arranged hybrid parts using cross-wedge rollingInternational Journal of Emerging Technology and Advanced Engineering. ISSN 2250-2459, ISO 9001:2008 Certified Journal, vol. 7 (2017) no. 7, pp. 1-7. | Datei |
  • Blohm, T.; Mildebrath, M.; Stonis, M.; Langner, J.; Hassel, T.; Behrens, B.-A. (2017): Investigation of the coating thickness of plasma-transferred arc deposition welded and cross wedge rolled hybrid partsProduction Engineering Research and Development | Datei |
    DOI: 10.1007/s11740-017-0734-7
  • Blohm, T.; Nothdurft, S.; Mildebrath, M.; Ohrdes, H.; Richter, J.; Stonis, M.; Langner, J.; Springer, A.; Kaierle, S.; Hassel, T.; Wallaschek, J.; Overmeyer, L.; Behrens, B.-A (2017): Investigation of the joining zone of laser welded and cross wedge rolled hybrid partsInternational Journal of Material Forming, Springer-Verlag France (2017) | Datei |
    DOI: 10.1007/s12289-017-1393-0
  • Blohm, T.; Stonis, M. Behrens, B.-A. (2017): Inkrementelle Umformung hybrider Halbzeuge mittels Querkeilwalzen22. Umformtechnisches Kolloquium Hannover (2017), Konferenzband | Datei |
  • Breidenstein, B.; Denkena, B.; Mörke, T.; Prasanthan, V. (2017): Non-Destructive Determination of Residual Stress Depth Profiles of Hybrid Components by Energy Dispersive Residual Stress MeasurementKey Engineering Materials, Vol. 742, S. 613-620 | Datei |
    DOI: 10.4028/www.scientific.net/KEM.742.613
  • Breidenstein, B.; Denkena, B.; Prasanthan, P. (2017): Funktionsangepasste Prozessplanung22. Umformtechnisches Kolloquium Hannover | Datei |
  • Breidenstein, B.; Denkena, B.; Prasanthan, V. (2017): Energy dispersive residual stress determination21. Symposium Verbundwerkstoffe und Werkstoffverbunde, 05.-07.07.2017, Bremen, 23 Seiten | Datei |
  • Brockmöller, T.; Gembarski, P.C.; Mozgova, I.; Lachmayer, R. (2017): Design Catalogue in a CAE Environment for the Illustration of Tailored Forming59th Ilmenau Scientific Colloquium, 11-15 September, Ilmenau | Datei |
  • Brockmöller, T.; Mozgova, I.; Lachmayer, R. (2017): Gestaltung und DimensionierungUmformungstechnisches Kolloquium, Hannover, Germany | Datei |
  • Brockmöller, T.; Mozgova, I.; Lachmayer, R. (2017): An Approach to Analyse the Potential of Tailored Forming by TRIZ ReverseProccedings of the 21st International Conference on Engineering Design (ICED 17) Vol 4: Design Methods and Tools, pp. 445-452, 21-25 August, Vancouver, Canada
  • Chugreeva, A.; Behrens, B.-A. (2017): Gesenkschmieden koaxial angeordneter HybridhalbzeugeInnovationspotenziale in der Umformtechnik, 22. Umformtechnisches Kolloquium Hannover, 15.–16. März 2017, PZH Verlag, Garbsen S. 207 | Datei |
  • Chugreeva, A.; Bouguecha, A.; Behrens, B.-A. (2017): Production Chain of Hot-Forged Hybrid Bevel Gears from Deposition-Welded Blanks7. WGP-Jahreskongress, 5.-6. Oktober 2017, Apprimus Verlag, Aachen, S. 21 | Datei |
  • Denkena B., Dahlmann D., Peters P., Witt M. (2017): Model based compensation of geometrical deviations due to process forcesConference on Supervising and Diagnostics of Machining Systems, Journal of Machine Engineering | Datei |
  • Denkena B.; Bergmann B.; Witt M. (2017): Automatic process parameter adaption for a hybrid workpiece during cylindrical operationsThe International Journal of Advanced Manufacturing Technology | Datei |
  • Duran, D.; Behrens, B.-A. (2017): Fließpressen seriell angeordneter HybridhalbzeugeBehrens, B.-A. (Hrsg.), Innovationspotenziale in der Umformtechnik, 22. Umformtechnisches Kolloquium Hannover, 15. – 16. März 2017, PZH Verlag, Garbsen, S. 198 | Datei |
  • Goldstein, R.; Behrens, B.-A.; Duran, D. (2017): Lightweighting by Tailored Forming: Bi-material Stepped ShaftHeat Treat 2017: Proceedings of the 29th ASM Heat Treating Society Conference, October 24-26, Columbus, Ohio, USA | Datei |
  • Herbst, S.; Aengeneyndt, H.; Maier, H. J.; Nürnberger, F. (2017): Microstructure and Mechanical Properties of Friction Welded Steel-Aluminum Hybrid Components after T6 Heat TreatmentMaterials Science & Engineering: A, 696, S. 33-41 | Datei |
    DOI: 10.1016/j.msea.2017.04.052
  • Herbst, S.; Dovletoglou, C. N.; Nürnberger, F. (2017): Method for Semi-Automated Measurement and Statistical Evaluation of Iron Aluminum Intermetallic Compound Layer Thickness and MorphologyMetallography, Microstructure and Analysis, Jahrgang 6, Heft 5 Seiten: 367-374 | Datei |
    DOI: 10.1007/s13632-017-0378-1
  • Herbst, S.; Nürnberger, F. (2017): Wärmebehandlung für belastungsangepasste Werkstoffeigenschaften von Tailored Forming-KomponentenInnovationspotenziale in der Umformtechnik, 22. Umformtechnisches Kolloquium Hannover, 15. – 16. März 2017, PZH Verlag, Garbsen, S. 193 | Datei |
  • Herbst, S.; Nürnberger, F. (2017): Heat Treatment of Steel-Aluminium Tailored Forming-ComponentsMetal Forming department. National Metallurgical Academy of Ukraine (Hg.): XI International Scientific and Technical Conference "Plastic Deformation of Metals", 22-26 May 2017, S. 48-49, Book of Abstracts: http://www.metal-forming.org/images/annot-2017/program-2017-omd.pdf | Datei |
  • Herbst, S.; Nürnberger, F. (2017): Heat Treatment of Steel-Aluminum Hybrid ComponentsMaterials Science and Technology 2017. Pittsburgh, 08.-12.10.2017, S. 53-60 | Datei |
  • Maier, H. J. (2017): Der richtige Werkstoff an der richtigen StelleJahresmagazin Werkstofftechnik 2017, S. 100-107, http://www.alphapublic.de/flashbook/096-487_Ing_Werkstoff_17/files/assets/common/downloads/096-487_Ing_Werkstoff_17.pdf | Datei |
  • Mildebrath, M.; Somonov, V.; Nothdurft, S.; Ohrdes, H.; Springer, A.; Kaierle, S.; Hassel, T.:, Maier, H.-J.; Wallascheck, J. (2017): Influence of silicon on the structure and weldability of steel-aluminium joints processed by non-vacuum electron beam weldingInternational Journal of Emerging Technology and Advanced Engineering, Volume 7, Issue 9, September 2017, p. 348-356 | Datei |
  • Mildebrath, M.; Blohm, T.; Hassel, T.; Stonis, M.; Langner, J.; Maier, H. J.; Behrens, B.-A. (2017): Influence of Cross Wedge Rolling on the Coating Quality of Plasma-Transferred Arc Deposition Welded Hybrid Steel PartsInternational Journal of Emerging Technology and Advanced Engineering | Datei |
  • Nothdurft, S.; Seffer, O.; Pfeifer, R.; Springer, A.; Kaierle, S. (2017): Leichtbau durch laserstrahlgefügte Stahl-Aluminium-MischverbindungenSchweißen und Schneiden 69 (2017) 9 600-607 | Datei |
  • Nothdurft, S.; Springer, A.; Kaierle, S.; Mildebrath, M.; Hassel, T.; Maier, H. J.; Ohrdes, H.; Wallaschek, J.; Overmeyer, L. (2017): Fügezonenbeeinflussung beim Laserstrahlschweiẞen von Stahl-Aluminium Mischverbindungen zur Verbesserung der UmformeigenschaftenInnovationspotenziale in der Umformtechnik, 22. Umformtechnisches Kolloquium Hannover, 15.-16. März 2017, PZH Verlag, Garbsen | Datei |
  • Nothdurft, S.; Springer, A.; Kaierle, S.; Mildebrath, M.; Hassel, T.; Ohrdes, H.; Wallaschek, J. (2017): Beeinflussung des Schmelzbades von Mischverbindungen im Laserstrahl-schweißprozess durch UltraschallFortschrittsberichte der Materialforschung und Werkstofftechnik / Bulletin of Materials Research and Engineering, Band 4, Tagungsband 2. Niedersächsisches Symposium Materialtechnik 23. bis 24. Februar 2017. Shaker, Aachen S. 259-268
  • Nothdurft, S.; Springer, A.; Kaierle, S.; Mildebrath, M.; Maier, H. J.; Hassel, T.; Ohrdes, H.; Twiefel, J.; Wallaschek, J.; Overmeyer, L. (2017): Influence of beam position and ultrasonic amplitude on the micro-structure of laser welded dissimilar steel-steel jointsInternational Congress on Applications of Lasers & Electro-Optics (ICALEO®) 22.-26.10.2017, Atlanta | Datei |
  • Pape, F.; Coors, T.; Barroi, A.; Hermsdorf, J.; Mildebrath, M.; Hassel, T.; Kaierle, S.; Matthias, T.; Bonk, C.; Chugreeva, A.; Bonhage, M.; Bouguecha, A.; Behrens, B.-A.; Overmeyer L.; Poll, G. (2017): Tribological Investigations on Tailored Formed Axial Bearing Washers6th World Tribology Congress, 17th – 22th September 2017, Beijing, China | Datei |
  • Quentin, L.; Beermann, R.; Pösch, A.; Reithmeier, E.; Kästner, M. (2017): 3D Geometry Measurement of Hot Cylindric Specimen Using Structured LightSPIE Optical Metrology | Datei |
    DOI: 10.1117/12.2269607
  • Quentin, L.; Beermann, R.; Pösch, A.; Reithmeier, E.; Kästner, M. (2017): 3d Geometry Measurement of Hot Specimens in Rough VacuumIn: Proceedings of SPIE 10329, SPIE Optical Metrology 25. – 29. June 2017, Munich, Germany Seitenzahl: pp. 103290U-1-103290U-6. | Datei |
  • Siqueira, R.; Lachmayer, R.; Mozgova, I. (2017): Development of a Topology Optimization Method for Tailored Forming Multi-Material DesignCOBEM 2017, 3-8 Dezember, Curitiba, Brazil | Datei |
  • Thürer, S. E.; Golovko, O.; Bonk, C.; Behrens, B.-A.; Bouguecha, A.; Klose, C.; Uhe, J. (2017): Einfluss der lokalen Mikrostruktur auf die Umformbarkeit stranggepresster Werkstoffverbunde22. Umformtechnisches Kolloquium Hannover, 15.-16.03.2017 | Datei |
  • Thürer, S. E.; Uhe, J.; Golovko, O.; Bonk, C.; Bouguecha, A.; Behrens, B.-A.; Klose, C. (2017): Mechanical Properties of Co-Extruded Aluminium-Steel CompoundsKey Engineering Materials Volume 742
    ISBN: 10.4028/www.scientific.net/KEM.742.512
  • Thürer, S. E.; Uhe, J.; Golovko, O.; Bonk, C.; Bouguecha, A.; Klose, C.; Behrens, B.-A.; Maier, H. J. (2017): Co-Extrusion of Semi-Finished Aluminum-Steel CompoundsAIP Conference Proceedings 1896, 140002 | Datei |
    DOI: http://dx.doi.org/10.1063/1.5008158
  • Barroi, A.; Albertazzi Gonçalves, D.; Hermsdorf, J.; Kaierle, S.; Overmeyer, L. (2016): Influence of Laser Power on the Shape of single Tracks in Scanner based Laser Wire Cladding9th International Conference on Photonic Technologies - LANE 2016 | Datei |
  • Barroi, A.; Hermsdorf, J.; Kaierle, S.; Overmeyer, L. (2016): Influence of Scan Width and Wire Feed Speed on Seam Geometry and the Substrate Surface in Laser Wire CladdingProceedings of Icaleo | Datei |
  • Behrens, B.-A. Prof.; Bouguecha, A.; Vucetic, M.; Huskic, A.; Uhe, J.; Frischkorn, C.; Matthias, T.; Stakhieva, A.; Duran, D.; Thürer, S. E.; Golovko, O.; Klose, C. (2016): Umformtechnische Herstellung hybrider Lagerbuchsenwt Werkstattstechnik online, Jahrgang 106 (2016) H. 10 | Datei |
  • Behrens, B.-A.; Bouguecha, A.; Frischkorn, C.; Chugreeva, A.; Duran, D. (2016): Angepasste Erwärmungs- und Umformverfahren für hybride Massivbauteile23. Sächsischen Fachtagung Umformtechnik (SFU) 2016, 7.-8. Dezember 2016, Dresden, Deutschland | Datei |
  • Behrens, B.-A.; Bouguecha, A.; Frischkorn, C.; Huskic, A.; Stakhieva, A.; Duran, D. (2016): Tailored Forming Technology for Three Dimensional Components: Approaches to Heating and Forming5th International Conference on Thermomechanical Processing, 26.-28. Oktober 2016, Mailand, Italien | Datei |
  • Behrens, B.-A.; Bouguecha, A.; Vucetic, M.; Peshekhodov, I.; Matthias, T.; Kolbasnikov, N.; Sokolov, S.; Ganin, S. (2016): Experimental investigations on the state of the friction-welded joint zone in steel hybrid components after process-relevant thermo-mechanicalAIP Conf. Proc. 1769, 130013 (2016) | Datei |
    DOI: http://dx.doi.org/10.1063/1.4963532
  • Behrens, B.-A.; Bouguecha, A.; Vucetic, M.; Peshekhodov, I.; Matthias, T.; Kolbasnikov, N.; Sokolov, S.; Ganin, S. (2016): Experimental investigations on the state of the friction-welded joint zone in steel hybrid components after process-relevant thermo-mechanical19th annual Conference on Material Forming ESAFORM2016, Mini-Symposium “Rolling and Forging”, 27-29 April 2016, Nantes, France | Datei |
  • Behrens, B.-A.; Bouguecha, A.; Vucetic, M.;Peshekhodov, I; Matthias, T. (2016): Experimentelle Untersuchungen der Fügezone hybrider Massivbauteile unter prozessähnlichen Beanspruchungen | Datei |
  • Breidenstein, B.; Denkena, B.; Prasanthan, V. (2016): Energy dispersive residual stress determinationEuro Hybrid- Materials and Structures | Datei |
  • Breidenstein, B.; Denkena, B.; Prasanthan, V. (2016): Energy dispersive residual stress determinationEuro Hybrid- Materials and Structures | Datei |
    ISBN: 978-3-88355-414-3
  • Breidenstein, B.; Prasanthan, V. (2016): Funktionsangepasste Prozessplanung der spanenden Bearbeitung hybrider BauteileArbeitstreffen „Energiedispersive Röntgenbeugung“, 17.03.2016, Berlin, 27 Seiten | Datei |
  • Denkena, B.; Dahlmann, D.; Brühne, B.; Witt M. (2016): Prozessbegleitende WerkstoffübergangsdetetektionZWF - Zeitschrift für wirtschaftlichen Fabrikbetrieb, 07-08/2016, Seite 407-410 | Datei |
  • Drafz, R.; Neubauer, T., Pape,F., Poll, G. (2016): Rolling contact fatigue lifetime model for combined matrials including residual stresses10th International Conference on Residual Stresses, Sydney, Australia
  • Drafz, R.; Poll, G. (2016): Ermüdungslebensdauermodell für kombiniert strukturmechanische und wälzbeanspruchte hybride Bauteilzonen2. Internationale Konferenz Euro Hybrid, Kaiserslautern, Germany
  • Gembarski, P.C.; Bibani, M.; Lachmayer, R. (2016): Design Catalogues: Knowledge Repositories for Knowledge-Based-Engineering14th International Design Conference, 16.-19. May 2016, Cavtat, Dubrovnik, Croatia | Datei |
  • Gembarski, P.C.; Sauthoff, B.; Brockmöller, T.; Lachmayer, R. (2016): Operationalization of Manufacturing Restrictions for CAD and KBE-Systems14th International Design Conference, 16.-19. May 2016, Cavtat, Dubrovnik, Croatia | Datei |
  • Nothdurft, S.; Lahdo, R.; Seffer, O.; Springer; A., Kaierle, S. (2016): High power laser welding for several applicationsOSA Laser Congress (Laser Applications Conference), 30.10.-03.11.2016, Boston
  • Ohrdes, H.; Fischer, H.; Twiefel, J.; Wallaschek, J. (2016): Experimental investigation of ultrasonic fluid mixing as assistance for a laser welding processInternational Conference on Noise and Vibration Engineering, Leuven (Belgium), 19-21. September 2015, Proceedings of ISMA 2016, pp. 1595-1603 | Datei |
  • Behrens, B.-A.; Huskic, A.; Frischkorn, C.; Duran, D. (2015): Fließpressen hybrider Halbzeugeveröffentlicht in wt Werkstattstechnik online, Ausgabe 10-2015 S. 704-708, Springer-VDI-Verlag, Düsseldorf | Datei |
  • Blohm, T. (2015): Querkeilwalzen bringt hybride Halbzeuge in FormPhi - Produktionstechnik Hannover informiert, PZH-Verlag, 18. Jg. (2015), ISSN 2198-1922
  • Hassel, T.; Nothdurft, S.; Saalbach; K.-A. (2015): Laserschweißen verbindet unterschiedliche MaterialienPhi - Produktionstechnik Hannover informiert | Datei |
  • Hockauf, R. (2015): Eigenspannung macht Hybride-Bauteile haltbarerPhi – Produktionstechnik Hannover informiert, 3/2015, 3 S. | Datei |
  • Matthias, T.; Peshekhodov, I. (2015): Numerische Simulation sagt Fügezonen-Versagen vorherphi – Produktionstechnik Hannover informiert, Ausgabe 3/2015, Garbsen | Datei |